Impact of material shape and compost/material loading ratio in home composting biodegradation tests of PHBV-Based Materials
Published by BAZART, Héloïse
About this dataset
Lien vers la fiche source This dataset contains two files, gathering biodegradation data from CO2 monitoring experiments conducted to assess the biodegradation of various polymer materials. The file denoted “Raw_results_doi_shredded” contains data for material tested in shredded shape. The file denoted “Raw_results_doi_film” is the same file with data related to the film shape for the same material. Each column represents a reactor evaluating one material biodegradation capacity at a specific material-to-inoculum (compost) ratio (dry weight w/w). Three ratios were tested: 1/3, 1/30 and 1/50. Each condition is realized in 4 replicates. The tested materials are cellulose or Kraft Paper as control, PET, PHBV and PHBV + 20% cellulose composite in shredded or film shape. The “Raw_results” sheet presents raw titration data collected after incubating a NaOH solution during a specified time periods. The parameters include: • concentration of the NaOH solution (M): “c_NaOH” • initial volume of NaOH solution (mL): “V_NaOH” • HCl concentration (M): “c_HCl” • Equivalent volume of HCl (ml) with the titration for each reactor These four parameters are used to calculate the daily nCO2 produced (mmol) for each reactor, as presented in the “CO2productionmmol” sheet using the following equation: nCO2 (mmol) = ((VNaOH * CNaOH) – VeqHCL * CHCL))/2 In the “realCO2_prod_mmol” sheet, daily CO2 production values are calculated cumulatively. The mean CO2 production of the compost without added material (i.e. endogenous) is subtracted from the calculated value of each reactor to obtain the CO2 production generated from the material. If the resulting CO2 production value is negative, it is corrected by retaining the previous value and adding 0, to prevent negative emissions calculated. In the “%Biodegradation” sheet, the biodegradation percentages are calculated by comparing the cumulative CO2 production with the theoretical maximum carbon conversion (based on the material’s carbon content) for each condition, in order to estimate the biodegradation percentages.
Tags
Live preview
The first rows, fetched from Opendatasoft hub when you open this page.
Loading the first rows from the source…