Debris Flow, Precipitation, and Volume Measurements in the Grizzly Creek Burn Perimeter June 2021-September 2022, Glenwood Canyon, Colorado (ver. 1.1, October 2023)
Published by U.S. Geological Survey
About this dataset
Debris Flow, Precipitation, and Volume Measurements in the Grizzly Creek Burn Perimeter June 2021-September 2022 https://doi.org/10.5066/P9Z7RROL This data release contains data summarizing observations within and adjacent to the Grizzly Creek Fire, which burned from 10 August to 18 December 2020. This monitoring data summarizes precipitation, observations of debris flows, and the volume of sediment eroded during debris flows triggered during the summer monsoonal period in 2021 and 2022. Summary rainfall data 2021 (1a_Storm_matrix_2021_gr1mmhr.csv) are provided in a comma-separated value (CSV) file. These data represent the maximum measured rainfall intensities during the monsoon months of 2021 (June-Sept). The columns in the csv file are: Date (m/dd/yy), Name (11 columns have unique gage names), Max 15 min (this is the maximum 15-minute rainfall intensity in mm/h for the unique gauge), Maximum Value for All Gages (this is the maximum rainfall intensity for all of the gauges in units of either mm/h or in/15 min), Peak 15-minute Intensity (in/15 min) (this is the total inches of rainfall in 15 minutes), Debris Flow (this can be 0 indicating no debris flow response, or 1 indicating a debris flow response). Note that we only display gauges that record data sufficient to produce a 15-minute rainfall intensity. Gauges with longer recording rates (e.g., 1 hour) cannot be used to compute the 15-minute rainfall intensity and are not displayed in this table. A null value (‘n/a’) populates the entries where the rain gauge did not measure a 15-minute rainfall intensity greater than 1 mm/hr. Time series rainfall data from the gauges are provided in the child item: Precipitation Data Grizzly Creek Burn Perimeter. Summary rainfall data 2022 (1b_Storm_matrix_2022_gr1mmhr.csv) are provided in a comma-separated value (CSV) file. These data represent the maximum measured rainfall intensities during the monsoon months of 2022 (June-Sept). The columns in the csv file are: Date (m/dd/yy), Name (7 columns have unique gage names), Max 15 min (this is the maximum 15-minute rainfall intensity in mm/h), Peak 15-minute Intensity (in/15 min) (this is the total inches of rainfall in 15 minutes), Debris Flow (this can be 0 indicating no debris flow response, or 1 indicating a debris flow response). Note that we only display gauges that record data sufficient to produce a 15-minute rainfall intensity. Gauges with longer recording rates (e.g., 1 hour) cannot be used to compute the 15-minute rainfall intensity and are not displayed in this table. A null value (‘n/a’) populates the entries where the rain gauge did not measure a 15-minute rainfall intensity greater than 1 mm/hr. Time series rainfall data from the gauges are provided in the child item: Precipitation Data Grizzly Creek Burn Perimeter. Debris Flow Observation data 2021 (2a_All_Verification_2021.csv) are provided in a comma-separated value (CSV) file. The columns in the csv file are: Year (yyyy), State, Fire Name, Fire_ID (index for the fire developed during the USGS debris flow hazard assessment), Fire_SegID (a specific index assigned by the USGS debris flow hazard assessment to the channel segment that produced the debris flow), Site Name (the name of the nearest milemarker on interstate 70), ObservationDate_mmddyyyy, ObservationLatitude_DD, ObservationLongitude_DD, DebrisFlowResponse (this can be 0 indicating no debris flow response, or 1 indicating a debris flow response), SourceOfObservation (name of the observer), StormDate_mmddyyyy, GaugeName, GaugeLatitude_DD, GaugeLongitude_DD, GaugeDist_km (distance from watershed of the debris flow observation to the nearest rain gage in km), StormAccum_mm (the total rainfall during a storm in millimeters), StormDuration_hr (the total duration of a storm in hours), Peak_I15_mm/h (the maximum 15 minute rainfall intensity in mm/h), Peak_I30_mm/h (the maximum 30 minute rainfall intensity in mm/h), Peak_I60_mm/h (the maximum 60 minute rainfall intensity in m