Skip to content
Open Data Finder
data.gov.uk

Laboratory frictional stability data from borehole core from the Horn River Basin, Canada, 2018-2024

Published by British Geological Survey (BGS)

About this dataset

This data set is comprised of experimental data collected from frictional stability tests in the laboratory to characterise both the frictional strength (µ) and the frictional stability (a-b) of lithologies acquired from the Horn River Basin, Canada. We prepared test specimens from core samples, collected at various depths from wells drilled through varying stratigraphies and subjected them to in situ pressure conditions before shearing. See Horn_River-Sampling_Test_Information accompanying data file for depth, location and specific test condition information. The triaxial experimental apparatus, used to undertake the friction tests, was designed and constructed at the University of Liverpool (Faulkner and Armitage, 2013). This apparatus is capable of triaxial deformation under confining pressures up to 250 MPa, applied using silicon oil confining medium, pore fluid pressures up to 200 MPa and differential loads up to 300 kN. These systems are all servo-controlled, with the confining and pore fluid pressure controlled and measured to a resolution <0.1 mm3. The servo-controlled pore fluid system can also be used as a volumometer, allowing the monitoring of changes in pore volume to a resolution of <0.1 mm3. De-ionised water was used as the pore fluid in this study, and was held at a constant 10 MPa in all tests. The axial load was generated by a servo-controlled electromechanical piston and was monitored by an internal force gauge with a resolution of <0.03 kN. For the tests a direct shear assembly was used, where a layer of powdered gouge is placed between two steel forcing blocks. Test specimens were prepared by levelling room-dry powder gouge onto one of the sliders in a preparation jig. The powder was then pre-loaded at ambient conditions to 50 MPa in a uniaxial press to a thickness of 1 mm. The sliders were then placed together and secured within a PTFE film and PVC jacket, with a PTFE shim applied to one end of the sample and then loaded into a sample assembly and placed into the triaxial deformation apparatus. To ensure experiment reproducibility all tests undertook the same sequence of incremental application of confining and pore fluid pressure, where the specimen was pressurised and saturated to effective pressure condition ranges expected within the Horn River Basin. Once the specimen was equilibrated under the test conditions it was axially loaded and ‘run-in’ to steady-state sliding under an initial velocity of 0.1 µm/s for 1.5 mm. Once ‘run-in’ sliding velocity steps were imposed at 0.5 mm internals, varying from 3 µm/s and 0.3 µm/s, to a total displacement of 5 mm. Tests were run at both Room (23 °C) and Insitu (125 °C) temperatures. From this data the frictional strength (µ), frictional stability (a-b) and compaction behaviour of the sheared materials can be determined, giving insight into how faults behaviour in these lithologies in nature.

Laboratory frictional stability data from borehole core from the Horn River Basin, Cana… · Open Data Finder