AGL - 2013 Gloucester Airborne Survey
Published by Bioregional Assessment Program
About this dataset
## Abstract This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. Collect Magnetic and Radiometric data over the Gloucester Basin in PEL285 - AGL ## Dataset History Airborne Survey (Heli). _____________________________________________________________________ Thomson Aviation Pty. Ltd. _______________________________________________________________________________ GEOPHYSICAL SURVEY DATA REPORT _______________________________________________________________________________ Date : 28 July 2013 This readme file describes the equipment and specifications of a geophysical airborne survey conducted by Thomson Aviation Pty. Ltd. The readme also summarises the data processing parameters and procedures used. CLIENT DETAILS --------------- Company Flown by : Thomson Aviation Pty. Ltd Company Processed: Thomson Aviation Pty. Ltd Client : AGL Energy Limited Company Job : Thomson 13018 AIRBORNE SURVEY EQUIPMENT: ------------------------- Aircraft : Bell Jet Ranger Magnetometer : Geometrics G822A Magnetometer Resolution : 0.001 nT Magnetometer Compensation : Post Flight Magnetometer Sample Interval : 0.05 seconds Hz Data Acquisition : GeOZ Model 2010 Spectrometer : Radiation Solutions RS 500 Crystal Size : 16.5 lt downward array Spectrometer Sample Interval : 1 seconds GPS Navigation System : Novatel OEMV-1VBS GPS Receiver AIRBORNE SURVEY SPECIFICATIONS ------------------------------ Area: Gloucester, NSW Flight Line Direction : 090 - 270 degrees Flight Line Separation : 50 metres Tie Line Direction : 180 - 000 degrees Tie Line Separation : 500 metres Terrain Clearance : 35 metres (MTC) Survey flown : June 2013 DATUM and PROJECTION -------------------- Datum : GDA94 Projection : MGA56 RADIOMETRIC PROCESSING PARAMETERS: ---------------------------------------- Tot.Count Potassium Uranium Thorium Height Attn 0.007434 0.009432 0.008428 0.007510 CPS to Eq 29.601 111.508 10.833 5.940 RADIOMETRIC STRIPPING RATIOS: ------------------------------ Alpha = 0.276 a = 0.048 Beta = 0.418 b = 0.003 Gamma = 0.759 g = 0.001 _____________________________________________________________________________________________ DATA PROCESSING : MAGNETIC DATA _____________________________________________________________________________________________ ____________________________________ MAGNETIC PROCESSING FLOW ____________________________________ The final magnetic data processing was performed using the following processing flow: - Aircraft magnetic data QC - Diurnal magnetic data QC - System parallax removal - Diurnal variation removal and addition of the mean diurnal base value - IGRF removal and addition of mean IGRF value. - levelling using polynomial Tie line levelling, - Micro levelling if required - Reduction to the pole. - Gridding using Minimum Curvature algorithm MAGNETIC QUALITY CONTROL ------------------------ The processing of the magnetic data firstly involved the routine quality control in the field of both the aeromagnetic and diurnal data during the acquisition phase. Any data found not meeting the required specifications were reflown. MAGNETIC PARALLAX CORRECTION ---------------------------- The total magnetic intensity aircraft data was firstly corrected for the effects of system parallax. The parallax parameters were determined and checked from the results of opposing test line flights. MAGNETIC DIURNAL CORRECTION --------------------------- The base station magnetometer data was edited and merged into the main database. The aeromagnetic data was corrected for diurnal variations by subtracting the observed magnetic base station deviations. There were no magnetic storms recorded by the diurnal monitoring station during the survey. The mean value was then added back to the data. MAGNETIC IGRF CORRECTION ------------------------ The data was corrected for the regional gradient of the International Geomagnetic Reference Field (IGRF). The I