Role of Antarctic sea ice as a natural ocean fertilizer during the spring 2012-13 sea ice research voyage SIPEX-2
Published by Australian Ocean Data Network
About this dataset
The dataset lists key biogeochemical parameters measured in sea ice during the SIPEX2 voyage, including dissolved and particulate iron and other trace metals, macronutrients (silicic acid, nitrates+nitrite, phosphoric acid and ammonium), iron binding organic ligands, dissolved and particulate organic carbon, Cholophylla, thermodynamics (temperature, salinity, brine volume and Rayleigh number). All sampling bottles and equipment were decontaminated using trace metal clean techniques. Care was taken at each site to select level ice with homogeneous snow thickness. At all the stations, the same sampling procedure has been used : Firstly, snow was collected using acid cleaned low density polyethylene (LDPE) shovels and transferred into acid-cleaned 3.8 l LDPE containers (Nalgene). Snow collected was analysed for temperature, salinity, nutrients, unfiltered and filtered metals. Snow thickness was recorded with a ruler. Ice cores were collected using a non-contaminating, electropolished, stainless steel sea ice corer (140 mm internal diameter, Lichtert Industry, Belgium) driven by an electric power drill. Ice cores were collected about 10 cm away from each other to minimise between-core heterogeneity. A first core was dedicated to the temperature, salinity and Chlorophyll a (Chla). To record temperature, a temperature probe (Testo, plus or minus 0.1 degrees C accuracy) was inserted in holes freshly drilled along the core every 5 to 10 cm, depending on its length. Bulk salinity was measured for melted ice sections and for brines using a YSI incorporated Model 30 conductivity meter. Chla is processed on board using a 10 AU fluorometer (turner Designs, sunnyvale California). The total length of this core is cut in sections of 7 cm. The second core is dedicated to the POC/PON (Particulate Organic Carbon/ Particulate Organic Nitrogen), DOC (Dissolved Organic Carbon) and nutrients. Six sections of 7 cm were sub-sampled from this core. The six sections were chosen so that two top, two intermediate and two basal sections. Two cores are taken for the trace metal analysis. Those cores were directly triple bagged in plastic bags (the inner one is milli-Q washed) and frozen at -20degrees C until analysis at the laboratory. Brine samples were collected by drainage from “sack holes”. Brines and under ice seawater (~1 m deep) were collected in 1 l Nalgene LDPE bottles using an insulated peristaltic pump and acid cleaned C-flex tubing (Cole Palmer). All samples were then transported to the ship as quickly as possible to prevent further freezing. Samples were used to analyse unfiltered and filtered metals, Chla, POC/PON, nutrients and DOC. Filtration for filtered metals was completed on board using a peristaltic pump and a 0.2 microns cartridge filter. All the unfiltered and filtered metals collected were acidified (2 ppt HCl seastar) and stored at room temperature until analysis at the laboratory. Nutrients, DOC and filters for POC/PON were stored frozen at -20 degrees C until analysis at Analytical Service Tasmania, Hbart. Chla filtrations and analysis were completed on board. The file "SIPEX2 sea ice data" lists key biogeochemical parameters in sea ice cores, snow, brine and underice seawater (1m depth) collected during the SIPEX2 voyage (64.26-65.15S/116.44-120.58E) carried out between the 26th of september and 29th of october 2012. The acid-cleaning protocols for sample bottles and equipment followed the guidelines of GEOTRACES (www.geotraces.org). Contamination-free ice coring equipment developed by Lannuzel et al. (2006) was used to collect ice cores. Ice cores were triple bagged and stored at -18 degrees C until further processing in the home laboratory. Ice cores were then sectioned under a class-100 laminar flow hood (AirClean 600 PCR workstation, AirClean System) using a medical grade stainless steel bonesaw (Richards Medical), thouroughly rinsed with ultra-high purity water (18.2 MO), and ice sections were then allowed to melt at ambient
Tags
- ACE/CRC
- AMD
- AMD/AU
- CATHODIC STRIPPING VOLTAMMETRY COMPETITIVE LIGAND EXPERIMENTS
- CEOS
- CHNS/O ELEMENTAL ANALYZERS > Carbon Hydrogen Nitrogen Elemental Analyzers
- CLE-CSV
- CONTINENT > ANTARCTICA
- CSV-CLE
- EARTH SCIENCE > CRYOSPHERE > SEA ICE > SALINITY
- EARTH SCIENCE > OCEANS > OCEAN CHEMISTRY > BIOGEOCHEMICAL CYCLES
- FIA > FLOW INJECTION ANALYSIS
- FLUOROMETERS
- GEOGRAPHIC REGION > POLAR
- ICP-MS > Inductively Coupled Plasma Mass Spectrometer
- OCEAN > SOUTHERN OCEAN
- R/V AA > R/V Aurora Australis
- SALINOMETERS