ACTGOV SURVEY CONTROL MARK
Published by ACT Government Geospatial Data Catalogue (ACTmapi)
About this dataset
A physical marker that is used as a stable basis for survey measurement. The mark is normally coordinated either horizontally and/or vertically using a recognised coordinate system. The mark can be used to coordinate surveys in the surrounding area. Survey Control Marks are displayed in ACTmapi by mark type. X and Y values should be treated as easting and northing. Z value uses AHD value and not elipsoid height. Major Control (MC): Identifier – district names, old surveyors’ names (e.g. Tennent, Goodwin) Trigonometrical stations (Trigs) – Generally consist of a ground mark with a quadripod above the ground mark. Most Trigs were part of the ACT Precision Zone, which in turn formed part of the national geodetic survey and adjustment for the Australian Geodetic Datum 1966 (AGD66). The ACT Precision Zone and its associated marks have been the primary survey control for all new development in the ACT since the early 1970s. The accuracy of ACT Precision Zone marks is 1 in 250,000 with respect to AGD66. In the early 1990s, 40 of the Precision Zone Trigs were surveyed with geodetic quality GPS observations as part of the GDA94. More recently, all the ACT trigonometrical network was re-surveyed with geodetic quality Global Navigation Satellite Systems (GNSS) observations for inclusion in the GDA2020 national adjustment. Continuously Operating GNSS Reference Stations (CORS) – In partnership with NSW DCS Spatial Services, OSGLI has established a network of permanent GNSS tracking stations which form part of CORSnet-NSW. This network is a key component of GDA2020 and provides centimetre-level real-time positioning for a range of scientific and spatial industry purposes. SGC values were also established on each CORS from the passive trigonometrical network. Sectional Control Marks (SC): Identifier – two alpha plus numerals (e.g. ST61) These marks are fixed directly from the ACT Precision Zone at approximately one-kilometre intervals. They usually consist of a deep driven rod protected by yellow timber or concrete posts. Some SC marks are beaconed (e.g. YA90, TG84). The accuracy of Sectional Control marks is 1 in 100,000. Subdivision or Neighbourhood Control Marks (SRM): Identifier – SRM plus numerals (e.g. SRM363) These marks are coordinated from Sectional Control at intervals of between 200m and 1000m. They usually consist of a galvanised pipe set in concrete or a galvanised star picket with a concrete collar and protected by two steel droppers, painted red and white. There may be an aluminium tag with the mark's identifier either set in the concrete of the mark or wired to one of the steel droppers. SRMs identifiers greater than 1000 consist of DH&Ws with an accompanying aluminium tag with the mark's identifier. The accuracy of Subdivision Control is 1 in 30,000. The subdivisions in Woden Valley (early 1960s) were the first to have Subdivision Control. In suburbs constructed before Gungahlin (pre-1990), SRMs were 50m to 100m apart. Some of these marks survived development and can be found in open spaces in the suburbs. Only those SRMs established since the 1990s have been entered in the survey control mark database ‘Control Base’. Information on earlier SRMs is contained on control plans. Coordinated Reference Marks (CRM) Identifier – CRM plus numerals (e.g. CRM7381) In today's subdivisions, numbered CRM plaques are placed in the kerb and coordinated by survey networks that include Sectional Control, Subdivisional Control marks or other previously coordinated CRMs/SRs. These marks are positioned up to 200m apart. The early style (flat) CRMs do not have a height attributed to them (e.g. CRMs numbered 1 to 9999). Since April 1998, a new style of CRM is used that has a raised nipple for accurate levelling. These are numbered from 10,001 onwards. Steel Rod (SR) Marks: Identifier – SR plus numerals (e.g. SR1691) SR marks are placed in new subdivisions, one for every 100 blocks. The mark consists of a deep driven steel rod contained within a s