Lidar mapping and Gully Assessment December 2023 (DCCEEW, Contract SON3352211, Griffith Uni)
Published by Australian Ocean Data Network
About this dataset
This dataset contains maps of alluvial and hillslope gullies across blocks of lidar covering portions of the Burdekin Catchment. This project is an expansion of the detailed gully mapping and assessment undertaken previously as part of NESP TWQ Project 5.10 (Daley et al., 2021), using newly available lidar as well as some older data not previously used. The gully polygons were generated using methods developed in the NESP TWQ 5.10 project for the extraction of gullies from lidar. Lidar is detailed topographic data collected from aircraft using an airborne laser scanning system. Methods: Lidar mapping and Gully Assessment SON3352211, December 2023. This project should be considered as the first step of a ‘prospecting’ effort, whereby high yielding high priority gullies are identified. Further investigations will be required (including on ground inspection) to firm up the prioritisation of gullies for rehabilitation. In all, gully mapping has been conducted across 1625 km2 (Figure 1). This is the area of lidar derived DEMs adjoining the areas within the Burdekin previously analysed by Daley et al. (2021) (Figure 1). This report briefly describes the generation of a new gully mapping dataset covering the 8 lidar blocks of the study area. Daley et al. (2021) provide a comprehensive description and discussion of the methods used below. Two small departures from the methods outlined therein have been adopted here. Firstly, the production of data layers was reordered, such that analyses that were previously restricted to just areas mapped as eroded landforms (i.e. PAE and Bare Soil described below) were here undertaken across the whole landscape, with the presence of high values for these metrics being used to identify areas for further investigation. This is a reversal (in a sense) of the approach used by Daley et al, who mapped all “gully like” features and then used PAE and Bare Soil metrics to distinguish actual gullies from features merely gully like. Here the approach has been to only search for (and map) gullies within areas of high PAE and Bare Soil. The second difference adopted here has been to define gully boundaries using two separate techniques for all observed gullies. In Daley et al, the choice of technique used to define the gully boundary was based on interrogation of general landscape slope, with 2% selected as a threshold separating areas where the Multi-direction hillshade (MDHS) approach was used from areas where the Mean Digital Elevation Model of Difference (Mean DoD) method was used. Early experimentation as part of this project found that this threshold method was occasionally unsatisfactory, as there were instances across all slope classes where the alternative approach provided the better representation of gully outline. In general, it was found that the MDHS method worked best where the gully had a more open form, which generally, but not always, occurred in areas of lower slope. Likewise it was found that the Mean DoD method worked best for linear or more reticulated forms, which generally but not always occurred in areas of higher slope. Examples of where the later did not apply is when an open form gully has mostly stabilised and revegetated, then re-incised, with the early phases of this re-incision taking the form of inset, more or less linear and/or reticulated gullying. To avoid the large amount of manual editing required where an inappropriate method was applied, it was found to be more parsimonious to run both techniques across all gullies, then select the approach which provided the best definition of gully boundary, requiring the least amount of manual digitising. Mosaiced Digital Elevation Models (DEM) One kilometre square DEMs were obtained from Geoscience Australia’s ELVIS portal (https://elevation.fsdf.org.au/) and mosaiced into 8 larger DEMs, each covering one of the 8 non-contiguous areas shown in Figure 1. The DEM data was used to define gully margins and derive the Potential Active Erosi