Passive acoustic recordings from sonobuoys deployed during the Antarctic Circumnavigation Expedition 2017
Published by Australian Ocean Data Network
About this dataset
This dataset contains acoustic recordings from Directional Frequency Analysis and Recording (DIFAR) sonobuoys that were deployed from 22 January – 18 March 2017 during the Antarctic Circumnavigation Expedition. During the 52 days at sea 301 sonobuoys were deployed yielding 492 hours of acoustic recordings. Two models of sonobuoys were used during the voyage: 1 was a bespoke reusable DIFAR buoy based on a sensor and radio from an AN/SSQ-53F sonobuoy (Ultra Electronics: SonobuoyTechSystems, USA) and 300 were re-lifed AN/SSQ-955-HIDAR (deployed in DIFAR compatibility mode; Ultra Electronics Sonar Systems, UK). Two dedicated acousticians monitored round-the-clock for blue, fin, sperm, humpback, minke, killer, and sei whales, and crabeater, leopard, Ross, and weddell seals and in all weather conditions. During ACE, we conducted a broad-scale, passing-mode passive acoustic survey for marine mammals in the Southern Ocean. Listening stations were conducted by deploying SSQ955 HIDAR sonobuoys in DIFAR (standard) mode to monitor for and measure bearings to vocalising whales while the ship was underway (Gedamke and Robinson 2010, Miller et al. 2015). During transit, listening stations were conducted every 30-60 nmi in water depths greater than 200 m. Sonobuoys were occasionally deployed with spacing less than 30 nmi in an attempt to more precisely determine spatial extent and vocal characteristics of calls that were believed to be coming from animals relatively close to the ship’s track. During terrestrial stopovers and marine science stations, sonobuoys were deployed approximately 2-4 nmi prior to stopping in order to attempt to monitor them for the full six-hour duration of their operational life. This distance ensured good radio signal while minimising acoustic interference from the vessel. The sampling regime was chosen to balance spatial resolution with the finite number of sonobuoys available for this study. Instrumentation, software, and data collection At each listening station, a HIDAR sonobuoy was deployed with the hydrophone set to a depth of 140 m. Sonobuoys transmitted underwater acoustic signals from the hydrophone and directional sensors back to the ship via a VHF radio transmitter. Radio signals from the sonobuoy were received using an omnidirectional VHF antenna (PCTel Inc. MFB1443; 3 dB gain tuned to 144 MHz centre frequency) and a Yagi antenna (Broadband Propagation Pty Ltd, Sydney Australia) mounted on the top of the helicopter control room at a height of 23.0 m. The antennas were each directly connected to a WiNRADiO G39WSBe sonobuoy receiver via low-loss LMR400 coaxial cable. The radio reception range on the Yagi antenna was similar to previous Antarctic voyages, and was adequate for monitoring and localisation typically out to a range of 12-14 nmi, provided that the direction to the sonobuoy was close (i.e. within around 30o) to the main axis of the antenna. The radio reception on the omnidirectional antenna typically provided 5-8 nmi of omnidirectional reception from sonobuoys. At transit speed (14-15 knots), the Yagi antenna provided about 55 minutes of acoustic recording time per sonobuoy Using both antennas together were able obtain radio reception for up to six hours (i.e. the maximum life of a 955 sonobuoy) when sonobuoys were deployed within 5 nmi of a marine science station. Received signals were digitised via the instrument inputs of a Fireface UFX sound board (RME Fireface; RME Inc.). Digitised signals were recorded on a personal computer as 48 kHz 24-bit WAV audio files using the software program PAMGuard (Gillespie et al. 2008). Data from both the Yagi and Omnidirectional antenna were recorded simultaneously as WAV audio channels 0 (left) and 1 (right). Each recorded WAV file therefore contains a substantial amount of duplication since both antennas and receivers were usually receiving the same signals from the same sonobuoy. Directional calibration The magnetic compass in each sonobuoy was calibrated/v
Tags
- AMD
- AMD/AU
- ANTARCTIC BLUE WHALE
- ANTARCTIC CIRCUMNAVIGATION EXPEDITION
- CEOS
- CONTINENT > ANTARCTICA
- EARTH SCIENCE > BIOLOGICAL CLASSIFICATION > ANIMALS/VERTEBRATES > MAMMALS > CARNIVORES > SEALS/SEA L
- EARTH SCIENCE > BIOLOGICAL CLASSIFICATION > ANIMALS/VERTEBRATES > MAMMALS > CETACEANS > BALEEN WHALE
- EARTH SCIENCE > BIOLOGICAL CLASSIFICATION > ANIMALS/VERTEBRATES > MAMMALS > CETACEANS > TOOTHED WHAL
- EARTH SCIENCE > OCEANS > OCEAN ACOUSTICS > AMBIENT NOISE
- GEOGRAPHIC REGION > POLAR
- IWC-SORP
- OCEAN > SOUTHERN OCEAN > BELLINGSHAUSEN SEA
- OCEAN > SOUTHERN OCEAN > ROSS SEA
- OCEAN > SOUTHERN OCEAN > SOUTH SHETLAND ISLANDS
- PASSIVE ACOUSTIC MONITORING
- R/V AKADEMIK TRESHNIKOV
- SONOBUOYS