Skip to content
Open Data Finder
data.gov.au

Pollution of a fractured rock aquifer by petrol - a case study

Published by Geoscience Australia Data

About this dataset

Shallow groundwater aquifers are susceptible to pollution by various contaminants. Amongst them, refined petroleum products are a serious hazard, because of their immiscibility with water, and the explosive and combustible nature of their more volatile constituents. Ground-water has been polluted by leaked or spilled petrol at two locations in Canberra in the Australian Capital Territory. At one location, seepage of the pollutant into the basement of a building caused a fatal explosion in 1977. Investigation by drilling showed that the pollution plume was pancake-shaped and floated on the water-table in a fractured mudstone aquifer; the plume extended over 5000 m2 and was up to 4.5 m thick. Remedial action has been undertaken for five years by pumping groundwater from a deep bore to depress the water-table, and removing the petrol that collects in the cone of depression with a skimming device. About 40 per cent of the original spill of about 32 000 litres has been removed, and the source traced to leakage from a nearby service station. At a second site, a pollution plume of petrol occurs on the water-table in cavernous limestone and affects about 300 m2 . At this locality, petrol has entered the basement of a building as a result of a rising water-table after heavy rain. The two incidents are due to a combination of circumstances, which include the location of underground fuel tanks in an area with a shallow water-table and in close proximity to buildings with basements extending below the water-table.

Pollution of a fractured rock aquifer by petrol - a case study · Open Data Finder