Geoscience Australia, 3 second SRTM Digital Elevation Model (DEM) v01
Published by Bioregional Assessment Program
About this dataset
## Abstract This dataset and its metadata statement were supplied to the Bioregional Assessment Programme by a third party and are presented here as originally supplied. The 3 second (\~90m) Shuttle Radar Topographic Mission (SRTM) Digital Elevation Model (DEM) version 1.0 was derived from resampling the 1 arc second (\~30m) gridded DEM (ANZCW0703013355). The DEM represents ground surface topography, and excludes vegetation features. The dataset was derived from the 1 second Digital Surface Model (DSM; ANZCW0703013336) by automatically removing vegetation offsets identified using several vegetation maps and directly from the DSM. The 1 second product provides substantial improvements in the quality and consistency of the data relative to the original SRTM data, but is not free from artefacts. Man-made structures such as urban areas and power line towers have not been treated. The removal of vegetation effects has produced satisfactory results over most of the continent and areas with defects are identified in the quality assessment layers distributed with the data and described in the User Guide (Geoscience Australia and CSIRO Land & Water, 2010). A full description of the methods is in progress (Read et al., in prep; Gallant et al., in prep). The 3 second DEM was produced for use by government and the public under Creative Commons attribution. The 3 second DSM and smoothed DEM are also available (DSM; ANZCW0703014216, DEM-S; ANZCW0703014217). ## Dataset History Source data 1. SRTM 1 second Version 2 data (Slater et al., 2006), supplied by Defence Imagery and Geospatial Organisation (DIGO) as 813 1 x 1 degree tiles. Data was produced by NASA from radar data collected by the Shuttle Radar Topographic Mission in February 2000. 2. GEODATA 9 second DEM Version 3 (Geoscience Australia, 2008) used to fill voids. 3. SRTM Water Body Data (SWBD) shapefile accompanying the SRTM data (Slater et al., 2006). This defines the coastline and larger inland waterbodies for the DEM and DSM. 4. Vegetation masks and water masks applied to the DEM to remove vegetation. 5. 1 second DEM resampled to 3 second DEM. 1 second DSM processing The 1 second SRTM-derived Digital Surface Model (DSM) was derived from the 1 second Shuttle Radar Topographic Mission data by removing stripes, filling voids and reflattening water bodies. Further details are provided in the DSM metadata (ANZCW0703013336). 1 second DEM processing (vegetation offset removal) Vegetation offsets were identified using Landsat-based mapping of woody vegetation. The height offsets were estimated around the edges of vegetation patches then interpolated to a continuous surface of vegetation height offset that was subtracted from the DSM to produce a bare-earth DEM. Further details are provided in the 1 second DSM metadata (ANZCW0703013355). Void filling Voids (areas without data) occur in the data due to low radar reflectance (typically open water or dry sandy soils) or topographic shadowing in high relief areas. Delta Surface Fill Method (Grohman et al., 2006) was adapted for this task, using GEODATA 9 second DEM as infill data source. The 9 second data was refined to 1 second resolution using ANUDEM 5.2 without drainage enforcement. Delta Surface Fill Method calculates height differences between SRTM and infill data to create a "delta" surface with voids where the SRTM has no values, then interpolates across voids. The void is then replaced by infill DEM adjusted by the interpolated delta surface, resulting in an exact match of heights at the edges of each void. Two changes to the Delta Surface Fill Method were made: interpolation of the delta surface was achieved with natural neighbour interpolation (Sibson, 1981; implemented in ArcGIS 9.3) rather than inverse distance weighted interpolation; and a mean plane inside larger voids was not used. Water bodies Water bodies defined from the SRTM Water Body Data as part of the DSM processing were set to the same elevations as in the DSM.